Condition: 100% Brand New

Features:remote car key

design: fashion car styling

Material: abs+metal

Color: show the picture

Button: 3/4 Buttons

blade;HAVE

battery:have

circuit board;yes

Frequency : 315/433MHz

Weight: 25g

Fitment:

For Infiniti/Nissan Frontier Murano Armada Pathfinder 2002-2008 KBRASTU15

And other model with the same specifications of key blank and battery holder listed as below

Programming Instructions 
2003 - 2006 Nissan 350Z

2002 - 2006 Altima

2002 - 2006 Maxima

2002 - 2006 Sentra

2002 - 2004 Infiniti I35

2003 - 2005 Infiniti G35 (Without Smart Entry System)

PROGRAM SYSTEM Frequency 315/433MHz Can Change

1.   Close and lock all doors with the driver’s side power lock/unlock switch.
2.   Insert key into ignition and remove it from the ignition key cylinder at least six times
     within 10 seconds. Your Hazard Lamps will flash if you have performed this step
     successfully. NOTE: Withdraw key completely from ignition cylinder each time. If this
     procedure is performed too fast, system will not enter programming mode.

3.   Insert key into the ignition cylinder and turn to the ACC position.

4.   Within 5 seconds, push ANY button on the remote transmitter. Your Hazard Lamps should
     flash. NOTE: Do not press the button more than one time in the above step. If the button
     is pressed more than one time, the programming procedure will not be successful.

5.   If there are any remaining transmitters (including the old ones), unlock then lock all doors
     using the driver’s side power lock/unlock switch and within 5 seconds, push ANY button
     on the next remote. Your Hazard Lamps should flash. Repeat this step for each
     transmitter (including any existing transmitters).

6.  Turn the key to the OFF position, remove keys from the ignition, unlock doors using the
    driver’s side power lock/unlock switch and open the driver side door.

Features:

1. The item is a new DIY remote key. Frequency 315/433MHz, blank chip.

2. The key includes key housing, circuit board, chip and battery. It's a full remote key.

3. You'll need to program the key and cut the blade at locl automotive locksmith before using.

Important Note:

1.You need to go to your local dealer or Locksmith shop to cut the key and program to your car,Locksmith should charge  less

than Dealer.

2.Please make sure your key is exaxtly same as ours, if you are not sure please send your original key photo to us for

confirming, we will help you to buy the correct key.

Package Includes:

1xkey

1xCircuit board

1xBattery

Important Note:
please check your FCC ID and the same key shape with your key.