LAUNCH X431 X-PROG 3 Key Programming Tool Auto Car Immobilizer

Launch X431 X-PROG 3 Vehicle Immobilizer Programmer Key programmer tool supports EEPROM read and write Key read and write , support work with X431 V/V+/PRO3S+/PAD V, ect

LAUNCH X431 XPROG 3 Features:

1. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables reading/writing EEPROM, on-board MCU and FOR BMW CAS4+/FEM chips, FOR Mercedes-Benz infrared keys, generating special keys, reading FOR BMW engine INS code.

2. Supported brands: For VW, For AUDI, For SKODA, For SEAT, For BMW, For MERCEDES-BENZ, For TOYOTA, etc. More models continue to be updated.

3. Supported systems: Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc.

4. Reads & writes most Engine/Gearbox ECUs without disassembling the shell

LAUNCH X431 X-PROG 3 Core Functions

EEPROM read and write
Key read and write
special key generation
on-board MCU read and write
BMW engine ISN code reading
Benz key
BMW CAS4+, FEM chip read and write
Key Simulator
Audi 5th generation steering column chip reading and writing
Volkswagen's fourth-generation meters are lost
OBD reads MED17 engine
Read engine in BENCH mode
Volkswagen fourth-generation UDS engine replacement
Boot mode read engine
Volkswagen MQB engine, gearbox, steering column lock replacement
Volkswagen four-generation free accounts are all lost
Mercedes-Benz engine gearbox wipe empty function
Transmission data reading

Working With LAUNCH Products here(could not work alone)

X431 V, X431 PRO3S+, X431 V+, X-431 PRO GT, X-431 PRO V4.0, X-431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII

LAUNCH X431 X prog 3 Supports Car List

For Abarth, For Alfa Romeo, For Aston Martin, For Audi, For Bentley, For Bmw, For BriBmw, For Bugatti, For Chang An, For Chevrolet, For Citroen, For Dacia, For Dallara, For Dodge, For Ferrari, For Fiat, For Ford, For Freightliner, For Geely, For GMC, For Honda, For Hyundai, For Infiniti, For Isuzu, For Jaguar, For Jeep, For JMC, For Kia, For Lamborghini, For Lancia, For Land Rover, For Lincoln, For Mahindra, For Maserati, For McLaren, For Mercedes, For Mini, For Mitsubishi, For Nissan, For Opel, For Peugeot, For Porsche, For Renault, For Saab, For Seat, For Skoda, For Subaru, For Suzuki, For Toyota, For Vauxhall, For Volkswagen (VW), For Volvo, EEPROM

Support Multi-language:

It supports mainstream manufacturers of common ECU MCUs, with more than 1,000 product models and continuous updates

Atmel NSC
Fujitsu Philips
Infineon Renesas M16
MC68HC05 Renesas M32
MC68HC08 Renesas M32R
MC68HC11 Renesas R32C
MC68HC12 Renesas R8C
MediaTek Renesas V850 SPI
MicroChip Renesas V850 UART
Nordic Samsung
ST SiLabs

It supports common mainstream EEPROM manufacturers, with nearly 1,000 product models, and is continuously being updated.

4Wire GI Numonyx SST
Adesto GigaDevice OKI ST
AKM Grundig ONSemi Toshiba
Altera HOLTEK Other Winbond
Amic Hynix PCT Xicor
Atmel I2C Philips xUSSR
BOSCH ITT Pioneer YMC
Catalyst KHIC PMC Spansion
Chingis Macronix Ramtron SPI
Dallas/Maxim MicroChip Rohm NEC
EON Micron Samsung NSC
ESMT MicroWire Seiko Ford
EXEL Mitsubishi Siemens Fujitsu
Fairchild Motorola Sony

How to use X-PROG3 to read and write data ?

Method 1:

use main cable to connect car OBD2 16pin interface, and X-PROG3, with LAUNCH X431 Tablet to do key matching, data reading and writing, etc.

Method 2:

Place the anti-theft EEPROM or MCU chip in the chip burning socket, and then insert the chip burning socket into the slot of the anti-theft matching programmer locker and lock it to realize the data interaction between the IC anti-theft chip and the diagnostic host

Method 3:

After removing the ECU from the car, connect the anti-theft ECU pin to the DIY slot of the anti-theft programmer through the cable to realize the data interaction between the anti-theft ECU and the diagnostic host

Specification of LAUNCH X431 X-PROG 3

Input Power: DC12V
Working CurrentMax: 500mA
Power Consumption: 5W
Storage Temperature: -20℃~70℃
Working Temperature: 0℃~50℃

Packing List of LAUNCH X431 X-PROG 3

- Main unit
- Power adaptor
- Main diagnostic cable
- The fourth-generation data acquisition cable
- The fourth-generation of EEPROM data acquisition cable (without dismantling dashboard)
- BENCH mode cable. MCu converter V1. MCU converter V2
- Mcu cable with multiple leads. EEPROM chip adaptor
- Benz infrared analog acquisition key
- MCU cable with multiple leads EEPROM converter
- User Manual